![Tuttnauer EZ10kP Fully Automatic Autoclave with Printer - Med Supplies Hub](http://medsupplieshub.com/cdn/shop/files/Tuttnauer_EZ10kP_Fully_Automatic_Autoclave_with_Printer_-_Med_Supplies_Hub_-6975_700x700.jpg?v=1716420446)
Tuttnauer EZ10kP Fully Automatic Autoclave with Printer
In Stock & Ready to Ship
All orders are shipped within 3-5 business days. Product ETA 7-10 business days.
Introducing the Tuttnauer EZ10kP Closed Door System Fully Automatic Autoclaves with Printer – a pinnacle of sterilization efficiency and ease of use designed for modern medical environments. This advanced autoclave system enhances your sterilization process with its cutting-edge features, ensuring that your instruments are not only sterilized but also dry and ready for their next use with unparalleled precision.
Key Features
-
Closed Door Drying: This innovative feature maintains sterility and guarantees efficient drying of packs and pouches within the closed chamber, enhancing safety and convenience.
-
High Efficiency Air Pump: A powerful air pump circulates filtered air throughout the chamber during the drying cycle, ensuring thorough drying without the need to open the door.
-
Optional Internal Printing: Keep accurate records of each cycle with internal printing options that document the date, time, temperature, and pressure, meeting documentation requirements with ease.
-
Easy-to-Read Control Panel: Navigate through the sterilization process with an intuitive control panel that features program selection, a detailed digital display, programmable keys, and clear system indicators.
-
Customizable Programs: Tailor the autoclave to meet your specific needs with customizable program parameters that can be adjusted and stored for repeated use, ensuring consistent results every time.
-
Versatile Sterilization Cycles: Comes pre-loaded with a variety of cycles for unwrapped instruments, wrapped packs, glassware, and an additional drying cycle, making it suitable for a wide range of sterilization needs.
The Tuttnauer EZ10kP Autoclave combines time-saving features and operational ease with the reliability and quality Tuttnauer is known for, making it an essential addition to any facility requiring high standards of sterilization.
Data & Software
Print a hard copy of cycle data with an optional built-in printer
- Date and time
- Temperature
- Temperature
- Pressure
- System messages and alerts
Technical Specs
NOTE
FDA
SO 13485:2003
ISO 9001:2000
Installation
Installation of Tabletop Autoclaves
Just the essential installation steps.
For units with a Microprocessor version # ending in WP (the version # is displayed on the screen each time the unit is turned on).
- Place unit on a sturdy level counter.
- Fill the Reservoir with distilled water
- The unit is ready to operate
To Adjust the Filling Time:
- Press the STOP Key repeatedly until the message “Code:xxx” appears.
- Using the UP/DN arrow keys change the code to 105, then press the STOP Key.
- A message will be displayed saying “Water in = xx sec”
- Using the UP/DN arrow keys change the seconds according to the following:
- EZ9 = 30 sec
- EZ10 = 35 sec
- 3870EK = 65 sec
- On some older units the message “Ea Type:” will appear,using the UP/DN arrow keys select either “0” for an E or EK type unit or “1” for an EA or EKA type unit.
- Press the STOP Key to finish
- The unit is ready to operate
For units with a Microprocessor version # NOT ending in WP
- Follow steps 1–5 for Manual Units above,then empty the water from the chamber and check the automatic water fill.
- Turn the unit on
- With the door open press and hold the door switch,then press the start button. When water starts flowing release the door switch.
- Water should come up to the same spot as the measured amount had.
- If need be adjust the automatic fill using the following procedure.
To Adjust the Automatic Filling:
- While leaving the door open turn power off.
- Press and hold the Manual Water Fill Button (this is the button with the two arrows).
- Turn the power back on
- When the normal display screen appears release the fill button –immediately press it in again and monitor the water flow
- Continue to hold the button until water reaches groove at front –then release button – wait ten seconds – the unit is reprogrammed.